Your Complete Communications Company

Time Change Programming  
 
  • Partner, Partner Plus, Partner II, ACS
From extension 10 or 11 press the feature button, then press 00 on keypad. Press the left ICM button two times, press #103 on keypad, enter correct time in military format. Press feature 00 to exit program.

  • Samsung DCS, IDCS
From any display phone enter programming mode by pressing the transfer key, then dial 200, enter passcode 1234, press VOL UP key, press TRSF, press TRSF key again, press 505 on keypad. Display shows Old and New. Enter same info except for last 4 digits, which is the time. Enter time in military format, press transfer key to store and exit.

  • Prostar 816 Plus
From any display phone enter program mode by pressing the # key on keypad, dial 04, enter password 4321, 1, #. Press #55 for date and time, display shows YY MM DD W HH MM. Enter same info except for last four digits. Enter digits in military time, press # when finished.

  • NEC DCS 1000/2000
From any display phone press ICM button #*#*, enter password 0000, press Hold button. Display shows Enter Program: enter 0302,press Hold, press the Volume UP button to scroll to Time? Enter correct time in military format. Follow same format as display, press Conf key to exit.

  • PCS Digital
From any display phone press Feat # 0, dial password 0000, enter save, select time in display, display shows : System Time, enter show, display shows YEAR: if year is correct press next until display shows HOUR: press chg: enter correct hour and press save, press next, display shows MINUTE: press chg: enter correct minute, press save, press CLEAR to exit programming.